THE BEST SHOCK ABSORBING GRIPS
IN THE INDUSTRY!
quantities of FIT available!
in Aqua, Black & Red
Aqua, Black, Green, Orange & Red
Description of XC and CR:
XC: Extra Chunky, Chunky mix - 65 grams | CR:
Chunky, Racer's Edge mix - 55 grams
CLICK HERE TO CHOOSE YOUR FIT
*CHUNKY- RECOMMENDED FOR
& RIDERS LOOKING FOR THE
BEST SHOCK ABSORBING GRIP IN THE INDUSTRY
*RACER'S EDGE- BEST SUITED
FOR THE ACKNOWLEDGED WEIGHT WEENIE
& THIN GRIP LOVERS
*EXTRA CHUNKY - THE THICKEST GRIPS AVAILABLE!
ESI BELIEVES LOGOS SHOULD BE AT
THE END OF YOUR BAR AND TREAD PATTERNS BELONG ON YOUR TIRES
NOT ON YOUR GRIPS!
WET OR DRY, YOUR
HANDS STAY PUT! SLIP-PROOF, YET NOT STICKY!
NUMBNESS - FATIGUE- ARM PUMP
UV RESISTANT -
NON-POROUS- WILL NOT HARDEN OR FADE
NO GLUE, HAIRSPRAY
OR LOCK-ONS REQUIRED! THESE GRIPS WILL NOT THROTTLE!
TEMPERATURES - CLIMATES - ANY CONDITION YOU CAN THROW AT IT!
INSTALL/REMOVE WITH RUBBING ALCOHOL- WINDOW CLEANER- COMPRESSED AIR
ESI GRIPS CAN
CONFORM TO YOUR HAND FOR MAXIMUM GRIP AND SHOCK ABSORPTION!
ESI grips are designed and
manufactured by a bicyclist to be the best.
Engineered one side thicker
for absorbing shock and vibration with the opposite side thinner for
bulk-reducing comfort. The best materials and the best
production process creates max shock absorption and grip, while
maintaining the lowest weight possible and the highest level of
proven lightweight grips are used by bicyclist all over the world.
No tread or logos needed!
Silicone has a memory; when you grab an ESI Grip you get a custom
mold of your hand for a no slip ride every time.
Clean handle bars. Press in
End Caps. Using Rubbing Alcohol or Window Cleaner clean inside of
ESI MTB grips, wet bar and inside of grip, slide onto bar. Rotate
grip to have the Thicker side towards palm. Let dry for 24 hours.
Slide a screw driver with a
dulled point (or something similar) under grip (careful not to
scratch bar or stretch grip), squirt Rubbing Alcohol, Window cleaner
or water under grip, twist grip off bar. Clean inside of grip with
Rubbing Alcohol or Window cleaner and reinstall. If you have access
to a compressor just blow them off.
Grip Shift or Custom sizes
You can cut ESI grips with
sharp scissors, utility knife, pipe cutter, etc. Hold next to your
bar and cut leaving an extra 1/8” in length. We recommend Chunky
style for a smooth transition on Grip Shift.
Wash your grips when you wash
your bike. If you do not wash your bike; clean when you can no
longer see what color your grips are or they lost that tacky feel.
Wash with Rubbing Alcohol, Window cleaner, etc... until clean.
For deep cleaning use Acetone and a rag – put acetone on the rag and
rub the grips until clean.
ESI's Silicone Grips and End
Caps do not contain any natural rubber or natural rubber latex in
its components or ingredients.
For more information please go to
our Questions and Answers page.
Install ESI MTB
grips by using Rubbing Alcohol, Compressed Air or Window cleaner ONLY!
*ESI's Silicone Grips, Tape and Bar Plugs do not contain any natural rubber or natural rubber latex in
its components or ingredients.
When purchasing from ESI you're guaranteed to receive quality products.
For more information please go to ESI Company Policies for warranty
or contact us by Phone: (760) 948-9100
or Email: firstname.lastname@example.org
Back to Top