Fit XC

$32.92

ESI's new fit grips are designed for a completely natural hand position on your handlebar. Our new design balances the pressure that your hands exert onto the handlebars, increasing bar control dr..

FIT CR

$32.92

ESI's new fit grips are designed for a completely natural hand position on your handlebar. Our new design balances the pressure that your hands exert onto the handlebars, increasing bar control dr..

Extra Chunky

$22.99

80 grams Standard Grip Length - 5 1/8" Installed Dia. 34mm Weight plus or minus 5% 1 Set of Bar Plugs Included Read about the Benefits of Silicone..

Chunky

$18.99

60 grams Standard Grip Length - 5 1/8" 32mm Weight plus or minus 5% 1 Set of Bar Plugs Included Read about the Benefits of Silicone..

Racer's Edge

$16.99

50 grams Standard Grip Length - 5 1/8" Installed Dia. 30mm Weight plus or minus 5% 1 Set of Bar Plugs Included Read about the Benefits of Silicone..

XL 6.75"

$23.99

Chunky XL 6.75”  – FOR RIDERS LOOKING FOR THE BEST SHOCK ABSORBING GRIP IN THE INDUSTRYExtra Chunky XL 6.75” - THE THICKEST GRIPS AVAILABLE!Read about the Benefits of Silicone..

XXL 8.25"

$29.99

Chunky XXL 8.25” - FOR RIDERS LOOKING FOR THE BEST SHOCK ABSORBING GRIP IN THE INDUSTRYExtra Chunky XXL 8.25” - THE THICKEST GRIPS AVAILABLE!Read about the Benefits of Silicone..

Showing 1 to 7 of 7 (1 Pages)

The ORIGINAL 100% Silicone Grips! The best shock absorbing grips in the industry.

Design

ESI grips are designed and manufactured by a bicyclist to be the best.

Engineered

Engineered one side thicker for absorbing shock and vibration with the opposite side thinner for bulk-reducing comfort. The best materials and the best production process creates max shock absorption and grip, while maintaining the lowest weight possible and the highest level of durability.

Proven

These race proven lightweight grips are used by bicyclist all over the world.

Memory

No tread or logos needed! Silicone has a memory; when you grab an ESI Grip you get a custom mold of your hand for a no slip ride every time.

Installation

Clean handle bars. Press in End Caps. Using Rubbing Alcohol or Window Cleaner clean inside of ESI MTB grips, wet bar and inside of grip, slide onto bar. Rotate grip to have the Thicker side towards palm. Let dry for 24 hours.

Removal

Slide a screw driver with a dulled point (or something similar) under grip (careful not to scratch bar or stretch grip), squirt Rubbing Alcohol, Window cleaner or water under grip, twist grip off bar. Clean inside of grip with Rubbing Alcohol or Window cleaner and reinstall. If you have access to a compressor just blow them off.

Grip Shift or Custom Sizes

You can cut ESI grips with sharp scissors, utility knife, pipe cutter, etc. Hold next to your bar and cut leaving an extra 1/8” in length. We recommend Chunky style for a smooth transition on Grip Shift.

Cleaning

Wash your grips when you wash your bike. If you do not wash your bike; clean when you can no longer see what color your grips are or they lost that tacky feel. Wash with Rubbing Alcohol, Window cleaner, etc... until clean. For deep cleaning use Acetone and a rag – put acetone on the rag and rub the grips until clean.

Latex Free

ESI's Silicone Grips and End Caps do not contain any natural rubber or natural rubber latex in its components or ingredients.

Copyright © 2017 Extreme Steering, Inc. All Rights Reserved.